Showing 41–60 of 71 results
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures calcium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition: 150 & 2000ppm calcium (default)
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 150 & 2000ppm calcium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Milk fever, or Sub Clinical Hypocalcemia (SCH) is a significant problem with dairy cows. Total calcium levels in the cows’ blood drop after lactation. By measuring the ionized calcium levels of the blood directly cow side, the treatment can start sooner and is more effective. The new LAQUAtwin CA-11C has been specially developed for cow side measurement of ionized calcium in blood. Ionized calcium reflects more accurately the current calcemic blood situation compared to total blood calcium as it equals the free available calcium ions.
- Minimum sample volume: 0.3ml
- 2 calibration points
- Auto standard recognition
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Supplied with accessories (see specifications for more details)
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures conductivity in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Up to 2 calibration points
- Auto range
- Auto calibration
- Auto standard recognition: 1413µS/cm & 12.88mS/cm
- Auto temperature compensation: 2%/ºC fixed
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Materials: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures conductivity in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Up to 3 calibration points
- Conductivity and temperature display
- Auto range
- Auto calibration
- Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Materials: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures conductivity and total dissolved solids (TDS) in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Up to 3 calibration points
- Conductivity, TDS, and temperature display
- Auto range
- Auto calibration
- Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- 4 Total dissolved solids curves: TDS Factor 0.4 to 1.0, EN 27888, 442, NaCl
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Materials: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
LAQUAtwin F-11: The World’s First Pocket-Sized Fluoride Ion Meter
- Revolutionary Fluoride Ion Analysis: Be a part of history with the world’s first and only pocket-sized fluoride ion meter.
- Micro-Sample Measurement Capabilities: The replaceable sensor, featuring a lanthanum trifluoride crystal, allows measurements in samples as small as 0.3 ml (or 0.1 ml with a sampling sheet).
- Extensive Measurement Range: Covering 0.1 to 990 ppm or mg/L, the meter delivers accurate fluoride ion readings.
- Unmatched Accuracy: With an accuracy of 2% of the actual value, the meter ensures reliable results for your analyses.
- Convenient Two-Point Auto Calibration: Achieve accuracy with two-point calibration, as the meter automatically recognizes and calibrates 1 ppm and 10 ppm fluoride ion standard solutions included in the kit. Customize calibration using other standard solutions that are ten-fold apart in concentration.
- Multiplying Compensation Function: Considering sample dilution in the reading, the meter features a multiplying compensation function to calculate the correct concentration.
- Auto Stable & Auto Hold Measurement Modes: Assisting users record stable readings, the meter displays smiley indicator and can freeze the reading.
- Temperature Calibration: Displaying temperatures up to 50.0°C, the meter allows for temperature correction through its calibration function.
- IP67 Rating: Waterproof and dustproof meter with digital LCD and backlit display
- Complete Package for On-the-Go Fluoride Ion Testing: Each F-11 meter comes with 1ppm and 10ppm fluoride ion standard solutions (14 ml each), TISAB solution (14 ml), 5-ml plastic beaker, batteries, syringe, and 5 sampling sheets.
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition: 150 & 2000ppm potassium (default)
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 150 & 2000ppm potassium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures sodium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition: 150 & 2000ppm sodium (default)
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 150 & 2000ppm sodium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures nitrate ion and nirate-nitrogen concentrations in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with accessories (see specifications for more details)
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
LAQUAtwin ORP-11: The World’s First Pocket-Sized ORP and Eh Meter
- Versatile Measurement: The only pocket-sized ORP meter that can measure not only ORP value, but also Eh value (voltage reading vs. the Standard Hydrogen Electrode or SHE)
- Precision in Every Drop: The replaceable sensor, featuring a platinum disk, enables measurements in samples as little as 0.3 ml (or 0.05 ml with sampling sheet).
- Wide Measurement Range: Covering -1000 mV to 1000 mV, the meter ensures accurate readings across a broad spectrum.
- Easy One-Point Auto Calibration: The meter automatically recognizes and calibrates the 225 mV standard solution included in the kit. Customize calibration using other ORP standard solution.
- Exceptional accuracy: With an accuracy of +/- 2mV, the meter delivers precise results every time.
- Auto Stable & Auto Hold Measurement Modes: Assisting users record stable readings, the meter displays smiley indicator and can freeze the reading.
- Temperature Compensation and Calibration: Displaying temperatures up to 50.0°C, the meter allows for temperature compensation as well as correction through its calibration function.
- IP67 Rating: Waterproof and dustproof meter with digital LCD and backlit display
- Complete Package for On-the-Go ORP Testing: Each ORP-11 meter comes with a 225 mV ORP standard solution (14 ml), an abrasive cotton swab for platinum disk polishing, dropper, batteries, and 5 sampling sheets.
-
The only pocket meter that directly measures pH in 0.1ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- pH and mV display
- Auto calibration
- Auto buffer recognition: USA & NIST pH buffers
- Auto temperature compensation
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter; 6 months – sensor
- Packed in handy carrying case
- Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
The only pocket meter that directly measures pH in 0.1ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)
- Up to 3 calibration points
- pH and mV display
- Auto calibration
- Auto buffer recognition: USA & NIST pH buffers
- Auto temperature compensation
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
The only pocket meter that directly measures pH in 0.1ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)
- Up to 5 calibration points
- pH, mV, and temperature display
- Auto calibration
- Auto buffer recognition: USA & NIST pH buffers
- Auto temperature compensation
- Temperature calibration: 5 to 40.0 ºC
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Salinity and temperature display
- Up to 2 calibration points
- Auto calibration
- Auto standard recognition: 0.50 & 5.00 % NaCl
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- 2 Salinity curves: NaCl & Seawater
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years – meter, 6 months – sensor
- Packed in handy carrying case
- Supplied with 0.5% & 5.0% NaCl standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Your lab-in-a-pocket
HORIBA’s unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures sodium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B) and converts it into salinity or NaCl salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Salinity, mV, and temperature display
- Up to 2 calibration points
- Auto calibration
- Auto standard recognition: 0.5 & 5.0% NaCl (default)
- Changeable high and low calibration values
- Temperature calibration: 5 to 40.0 ºC
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
- Warranty: 2 years – meter; 6 months – sensor
- Packed in handy carrying case
- Supplied with 0.5% & 5.0% NaCl standards (14ml each), 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
-
Enquire for Price
- Model range: Extraction of hazardous materials
- Model line: Technical ventilation – safety cabinets
- Model group: UFA
- Model: UFA.025.030
- External dimensions W x D x H (mm): 308 x 555 x 256
- Weight excluding packaging (kg): 18,00
- Tariff Number: 84213925
- GTIN: 4250101190117
- Item Code: 39306
Optional accessories and technical ventilation are available and purchased separately. If you should require a customised special solution, please contact our technical specialists using our enquiry form or at [email protected].
Installation is required. Special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, will attract additional freight charges (quoted separately).
Optional accessories are available for purchase separately. If you require a customised solution, please get in touch with our technical specialists by selecting the “Make an enquiry” button and using our enquiry form or by emailing [email protected].
Installation, training and special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, are chargeable in addition to standard freight and will be quoted separately before dispatch.
Availability:On Request
SKU IASE39306
-
Enquire for price
- Model range: Safety cabinet
- Model line: ION-LINE
- Model group: ION-CORE-90
- Model: IO90.195.060.CC.WDC
- External dimensions W x D x H (mm): 599 x 615 x 1953
- Internal dimensions W x D x H (mm): 450 x 503 x 1647
- Weight excluding packaging (kg): 330,00
- Tariff Number: 94032080
- GTIN: 4054923265394
- Item Code: 41302-047-41366
- Colour: Body: RAL 7016 anthracite grey; Door(s): RAL 5010 gentian blue, textured
Optional accessories and technical ventilation are available and purchased separately. If you should require a customised special solution, please contact our technical specialists using our enquiry form or at [email protected].
Installation is required. Special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, will attract additional freight charges (quoted separately).
Optional accessories are available for purchase separately. If you require a customised solution, please get in touch with our technical specialists by selecting the “Make an enquiry” button and using our enquiry form or by emailing [email protected].
Installation, training and special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, are chargeable in addition to standard freight and will be quoted separately before dispatch.
-
- Model range: Safety cabinet
- Model line: ION-LINE
- Model group: ION-PRO-90
- Model: IO90.195.120.PC.WDC
- External dimensions W x D x H (mm): 1193 x 615 x 2114
- Internal dimensions W x D x H (mm): 1050 x 503 x 1647
- Weight excluding packaging (kg): 542,00
- Tariff Number: 94032080
- GTIN: 4054923267992
- Item Code: 41269-047-41392
- Colour: Body: RAL 7016 anthracite grey; Door(s): RAL 5010 gentian blue, textured
Optional accessories and technical ventilation are available and purchased separately. If you should require a customised special solution, please contact our technical specialists using our enquiry form or at [email protected].
Installation is required. Special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, will attract additional freight charges (quoted separately).
-
Enquire for price
- Model range: Safety cabinet
- Model line: ION-LINE
- Model group: ION-PRO-90
- Model: IO90.195.120.PS.WDC
- External dimensions W x D x H (mm): 1193 x 615 x 1953
- Internal dimensions W x D x H (mm): 1050 x 503 x 1647
- Weight excluding packaging (kg): 530,00
- Tariff Number: 94032080
- GTIN: 4054923268241
- Item Code: 41429-047-41387
- Colour: Body: RAL 7016 anthracite grey; Door(s): RAL 5010 gentian blue, textured
Optional accessories and technical ventilation are available and purchased separately. If you should require a customised special solution, please contact our technical specialists using our enquiry form or at [email protected].
Installation is required. Special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, will attract additional freight charges (quoted separately).
Optional accessories are available for purchase separately. If you require a customised solution, please get in touch with our technical specialists by selecting the “Make an enquiry” button and using our enquiry form or by emailing [email protected].
Installation, training and special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, are chargeable in addition to standard freight and will be quoted separately before dispatch.
-
Model
- Type 90 safety storage cabinet
- Free-standing unit with wing doors (left-hinged)
- With cylinder locking and a locking state indicator
- Integrated adjusting aids to compensate for uneven floor
- Model line Q-LINE
- Model class Q-CLASSIC-90
- Model Q90.195.060
- Type tested in accordance with EN 14470-1
- DIN EN 16121/16122
- GS certified
- CE compliant
- Dimensions exterior: W x D x H (mm) 599 x 615 x 1953
- Dimensions interior: W x D x H (mm) 450 x 522 x 1647
Colour
- Body colour anthracite grey (RAL 7016)
- With a wing door in Traffic red (RAL 3020)
Interior equipment with
- 3 x shelf, load capacity: 75 kg, powder-coated sheet steel, RAL 7035 light grey
- 1 x perforated insert, load capacity: 75 kg, powder-coated sheet steel, RAL 7035 light grey
- 1 x bottom collecting sump, capacity: 22 litres, powder-coated sheet steel, RAL 7035 light grey
- Optional accessories and technical ventilation are available and purchased separately. If you should require a customised special solution, please contact our technical specialists using our enquiry form or at [email protected].
- Installation is required. Special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, will attract additional freight charges (quoted separately).
Optional accessories are available for purchase separately. If you require a customised solution, please get in touch with our technical specialists by selecting the “Make an enquiry” button and using our enquiry form or by emailing [email protected].
Installation, training and special delivery requirements, such as the need for tail-lift trucks and additional labour and installation for large equipment and hazardous material (Hazmat) packaging, are chargeable in addition to standard freight and will be quoted separately before dispatch.
